Rs-232 Parameter Defaults - Motorola DS6708 Product Reference Manual

7 - 4 DS6708 Digital Scanner Product Reference Guide

RS-232 Parameter Defaults

Table 7-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar
code(s) provided in the RS-232 Host Parameters section beginning on page 7-5.
NOTE See
miscellaneous default parameters.
RS-232 Host Default Table
Table 7-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Stop Bit Select
Data Bits
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Timeout
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Appendix A, Standard Default Parameters
Parameter
for all user preferences, hosts, symbologies, and
Default
Standard 7-7
9600 7-8
None 7-10
1 Stop Bit 7-11
8-Bit 7-11
Enable 7-12
None 7-12
None 7-14
2 Seconds 7-16
Low RTS 7-17
Disable 7-17
0 msec 7-18
Normal Operation 7-19
Send Bar Code 7-19
Page
Number