Rs-232 Parameter Defaults - Motorola Symbol DS6607 Product Reference Manual

RS-232 Parameter Defaults

Table 7-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s) provided in the RS-
232 Host Parameters section beginning on page 7-6.
See Appendix A, Standard Default Parameters
miscellaneous default parameters.
Note
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Stop Bit Select
Data Bits
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
for all user preferences, hosts, symbologies, and
Table 7-1. RS-232 Host Default Table
Parameter Default Page Number
Standard 7-8
9600 7-9
None 7-11
1 Stop Bit 7-11
8-Bit 7-12
Enable 7-12
None 7-13
None 7-15
2 Sec 7-16
Low RTS 7-17
Disable 7-17
0 msec 7-18
Normal Operation 7-19
Send Bar Code 7-19
RS-232 Interface 7-5