Chapter 7 User Preferences & Miscellaneous Scanner Options; Introduction - Motorola LI2208 Product Reference Manual

CHAPTER 7 USER PREFERENCES &

Introduction

If desired, configure the linear imager to perform various functions, or activate different features. This chapter
describes imaging preference features and provides programming bar codes for selecting these features.
The linear imager ships with the settings in
Appendix A, STANDARD DEFAULT PARAMETERS
values suit requirements, programming is not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in
non-volatile memory and are preserved even when you power down the linear imager.
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
If not using a USB cable, select a host type (see each host chapter for specific host information) after the
power-up beeps sound. This is only necessary upon the first power-up when connecting to a new host.
To return all features to default values, scan the
bar code menus, asterisks (
*
Indicates Default
MISCELLANEOUS SCANNER
OPTIONS
User Preferences Parameter Defaults on page 7-2
for all host device and miscellaneous defaults). If the default
Default Parameters on page
*
) indicate default values.
*
Do Not Suppress Power Up Beeps
(also see
7-4. Throughout the programming
Feature/Option