Rs-232 Parameter Defaults - Motorola DS6878 Product Reference Manual

If a power supply is used, disconnect the power supply before changing host cables or the cradle may not
recognize the new host.

RS-232 Parameter Defaults

Table 8-1 lists the defaults for RS-232 host parameters. If any option needs to be changed, scan the appropriate
bar code(s) provided in the Parameter Descriptions section beginning on
NOTE See
miscellaneous default parameters.
RS-232 Host Default Table
Table 8-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
CR0078-P Baud Rate
Parity Type
Data Bits (ASCII Format)
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Appendix A, Standard Default Parameters
Parameter
page
for all user preferences, hosts, symbologies, and
Default
Standard 8-6
9600 8-8
None 8-8
None 8-10
8-Bit 8-11
Enable 8-11
None 8-12
None 8-14
2 sec 8-16
Low RTS 8-17
Disable 8-17
0 msec 8-18
Normal Operation 8-19
Send Bar Code 8-19
RS-232 Interface
8-4.
Page
Number
8 - 3