Nixdorf Beep/Led Options; Ignore Unknown Characters - Motorola LI2208 Product Reference Manual

4 - 18 LI2208 Product Reference Guide

Nixdorf Beep/LED Options

When Nixdorf Mode B is selected, this indicates when the linear imager should beep and turn on its LED after
a decode.
*
Normal Operation
(Beep/LED immediately after decode)
Beep/LED After CTS Pulse

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. When Send Bar Codes with Unknown
Characters is selected, all bar code data is sent except for unknown characters, and no error beeps sound on
the linear imager. When Do Not Send Bar Codes With Unknown Characters is selected, bar code data is
sent up to the first unknown character and then an error beep sounds on the linear imager.
Do Not Send Bar Codes with Unknown Characters
Beep/LED After Transmission
*
Send Bar Code with Unknown Characters