User Preferences; Default Parameters - Motorola LI2208 Product Reference Manual

7 - 4 LI2208 Product Reference Guide

User Preferences

Default Parameters

The scanner can be reset to two types of defaults: factory defaults or custom defaults. Scan the appropriate
bar code below to reset the scanner to its default settings and/or set the scanner's current settings as the
custom default.
•
Restore Defaults - Resets all default parameters as follows:
• If custom default values were configured (see Write to Custom Defaults), the custom default values
are set for all parameters each time the Restore Defaults bar code below is scanned.
• If no custom default values were configured, the factory default values are set for all parameters each
time the Restore Defaults bar code below is scanned. (For factory default values, see
STANDARD DEFAULT PARAMETERS
•
Set Factory Defaults - Scan the Set Factory Defaults bar code below to eliminate all custom default
values and set the scanner to factory default values. (For factory default values, see
STANDARD DEFAULT PARAMETERS
•
Write to Custom Defaults - Custom default parameters can be configured to set unique default values
for all parameters. After changing all parameters to the desired default values, scan the Write to Custom
Defaults bar code below to configure custom defaults.
Restore Defaults
Write to Custom Defaults
beginning on
page A-1
beginning on .)
page A-1
.)
Appendix A,
*
Set Factory Defaults
Appendix A,