Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see
parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not
have a bold entry remain the same whether or not this parameter is enabled.
Enable Function Key Mapping
FN1 Substitution
When enabled, the linear imager replaces FN1 characters in an EAN128 bar code with a keystroke chosen by
the user (see
FN1 Substitution Values on page
Enable FN1 Substitution
KEYBOARD WEDGE INTERFACE
Table 6-2 on page
*
Disable Function Key Mapping
7-26).
*
Disable FN1 Substitution
6 - 9
6-12). When this