Convert Gs1 Databar To Upc/Ean - Motorola LI2208 Product Reference Manual

9 - 68 LI2208 Product Reference Guide

Convert GS1 DataBar to UPC/EAN

Parameter # F0h, 8Dh
This parameter only applies to GS1 DataBar-14 and GS1 DataBar Limited symbols not decoded as part of a
Composite symbol. Enable this to strip the leading '010' from DataBar-14 and DataBar Limited symbols
encoding a single zero as the first digit, and report the bar code as EAN-13.
For bar codes beginning with two or more zeros but not six zeros, this parameter strips the leading '0100' and
reports the bar code as UPC-A. The UPC-A Preamble parameter that transmits the system character and
country code applies to converted bar codes. Note that neither the system character nor the check digit can be
stripped.
Enable Convert GS1 DataBar to UPC/EAN
(01h)
*
Disable Convert GS1 DataBar to UPC/EAN
(00h)