Linear Imager Picklist Mode - Motorola LI2208 Product Reference Manual

7 - 12 LI2208 Product Reference Guide

Linear Imager Picklist Mode

Parameter # 04h BBh
This mode allows a user to decode one of multiple bar codes printed close together, when the scan illumination
intersects more than one bar code. The out-of-box default for this mode is Auto-discriminate.
NOTE Picklist Mode cannot decode bar codes printed on top of one another. If the scan illumination crosses
through two bar codes printed on top of one another, a decode may or may not occur. If a decode occurs,
the bar code scanned is not identified.
There are three settings for this mode:
•
Always Enabled - When multiple bar codes are close together in a row, the bar code decoded is always
the one in the center of aiming beam.
•
Always Disabled - When multiple bar codes are close together in a row, the bar code decoded is the
first bar code that comes into scanner field of view.
•
Auto-discriminate (default) - When there is only one bar code in the scanner field of view, decode is
always attempted; when multiple bar codes are close together in a row, the bar code decoded is always
the one in the center of the aiming beam.
*
Auto-discriminate
Enable Picklist Mode
(02h)
(01h)
Disable Picklist Mode
(00h)