Codabar (Nw - 7); Enable/Disable Codabar; Set Length(S) For Codabar - Motorola LI2208 Product Reference Manual

Hide thumbs Also See for LI2208:
Table of Contents

Advertisement

Codabar (NW - 7)

Enable/Disable Codabar

Parameter # 07h
To enable or disable Codabar, scan the appropriate bar code below.
*
Enable Codabar

Set Length(s) for Codabar

Parameter # L1 = 18h, L2 = 19h
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within
a specific range. The default option is Length Within Range. The range is 4 to 60.
One Discrete Length - Select this option to decode only Codabar symbols containing a selected length.
Select the length using the numeric bar codes in
decode only Codabar symbols with 14 characters, scan Codabar - One Discrete Length, then scan 1
followed by 4. To correct an error or to change the selection, scan
Two Discrete Lengths - Select this option to decode only Codabar symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
For example, to decode only Codabar symbols containing either 2 or 14 characters, select Codabar -
Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan
Length Within Range - Select this option to decode a Codabar symbol with a specific length
range. Select lengths using numeric bar codes in
to decode Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length
Within Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an
error or change the selection, scan
from 4 to 60).
Any Length - Scan this option to decode Codabar symbols containing any number of characters within
the linear imager's capability.
(01h)
Cancel on page
E-3.
Cancel on page
Disable Codabar
(00h)
Appendix E, NUMERIC BAR
Cancel on page E-3.
Appendix E, NUMERIC BAR
Appendix E, NUMERIC BAR CODES.
E-3. This is the default option (length within range
SYMBOLOGIES 9 - 51
CODES. For example, to
CODES.
For example,

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents