Optional Usb Parameters; Ignore Beep; Ignore Bar Code Configuration - Motorola LI2208 Product Reference Manual

Optional USB Parameters

If you configure the linear imager and find the settings were not saved, or changed, when the system is
restarted scan the bar codes that follow to override USB interface defaults.
Scan a bar code below after setting defaults and before configuring the linear imager.

Ignore Beep

The host can send a beep request to the linear imager. When this parameter is enabled, the request is not sent
to the attached linear imager. All directives are still acknowledged to the USB host as if it were processed.
*

Ignore Bar Code Configuration

The host has the ability to enable/disable code types. When this parameter is enabled, the request is not sent
to the attached linear imager. All directives are still acknowledged to the USB host as if it were processed.
*
Disable
Disable
USB INTERFACE 3 - 15
Enable
Enable