Rs-232 Parameter Defaults - Motorola Symbol DS9808 Product Reference Manual

RS-232 Parameter Defaults

Table 7-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the RS-232 Host Parameters section beginning on page 7-4.
NOTE See
miscellaneous default parameters.
RS-232 Host Default Table
Table 7-1
RS-232 Host Parameters
RS-232 Host Types
Baud Rate
Parity Type
Data Bits
Check Receive Errors
Hardware Handshaking
Software Handshaking
Host Serial Response Time-out
RTS Line State
Beep on <BEL>
Intercharacter Delay
Nixdorf Beep/LED Options
Ignore Unknown Characters
Note: The Symbol DS9808 supports one stop bit only.
Appendix A, Standard Default Parameters
Parameter
for all user preferences, hosts, symbologies, and
Default
Standard 7-6
9600 7-8
None 7-9
8-Bit 7-9
Enable 7-10
None 7-10
None 7-12
2 Sec 7-14
Low RTS 7-15
Disable 7-15
0 msec 7-16
Normal Operation 7-17
Send Bar Code 7-17
RS-232 Interface
Page
Number
7 - 3