Table of Contents
Advertisement
3—Basic Operation of the Tau and GUI
3.9
Digital Video Tab
Tau offers a LVDS interface digital output that can be configured in four modes. Changing these
modes will have no effect on the analog (NTSC or PAL) signal. In order to access the digital
output, you must use an advanced interface as described in Chapter 4, Tau Digital Data
Channel. See the Tau Electrical Interface Control Document (102-PS220-41) for information on
how to access digital video for LVDS, BT.656, and CMOS.
1. Select Video
Camera Digital Output
Note
The Revert feature is not available in digital video.
Note
AGC mode will only affect the digital data output if Camera Digital Output mode is set to 8-bit
data.
Off: The digital data stream coming from the Tau camera is turned off.
3-20
Figure 3-8: FLIR Camera Controller GUI Digital VIdeo Tab
June 2011
Tau User's Manual
2. Select Digital Video
TAU-0035-00-10, version 150
Hide quick links:
Advertisement
Table of Contents
