System Resources And Maps; Memory Map; I/O Map - VersaLogic EPM-15 Reference Manual

Memory Map

The lower 1 MB memory map of the EPM-15 is arranged as shown in the following table.
Various blocks of memory space between C0000h and FFFFFh can be shadowed. The CMOS
setup is used to enable or disable this feature.

I/O Map

The following table lists the common I/O devices in the EPM-15 I/O map. User I/O devices
should be added using care to avoid the devices already in the map as shown in the following
table.
Note:
The I/O ports occupied by on-board devices are freed up when the device is
disabled in the CMOS setup.
EPM-15 Reference Manual

System Resources and Maps

Table 12: Memory Map
Start End
Address Address
E0000h FFFFFh
DC000h DFFFFh
D0000h DBFFFh
C0000h CFFFFh
A0000h BFFFFh
00000h 9FFFFh
Table 13: On-Board I/O Devices
I/O Device
Special Control Register
Jumper and Status Register
RS-485/422 Tx/Rx Control Register
Reserved
Primary Hard Drive Controller
COM4 Serial Port
LPT1 Parallel Port
COM3 Serial Port
COM1 Serial Port
Comment
System BIOS
Reserved
PC/104
Video BIOS
Video RAM
System RAM
Standard
I/O
Addresses
1D0h
1D2h
1DAh
1E0h
1F0h – 1F7h
2E8h – 2EFh
378h – 37Fh
3E8h – 3EFh
3F8h – 3FFh
6 6
39