Technical Specifications - VersaLogic EPM-15 Reference Manual

Technical Specifications

Specifications are typical at 25°C with 5.0V supply unless otherwise noted.
Specifications are subject to change without notification.
Board Size:
3.55" x 3.775" (PC/104 standard) with 0.20"
connector overhangs in designated connector areas
Storage Temperature:
Operating Temperature:
EPM-15g, S – 0° C to +60° C free air, no airflow,
standard version
EPM-15h, E – -40° C to +85° C free air,
extended temperature version
Power Requirements:
system DDR SDRAM, keyboard and
Windows XP)
5V ± 5% @ 1.0 A (5.0 W) typ.
+3.3V or ± 12V may be required by some
expansion modules
System Reset:
3.3V sensing, resets below 2.94V typ.
cc
DRAM:
256 to 512 MB soldered-on DDR SDRAM
Video Interface:
Up to 1280 x 1024 (24 bits)
Standard RGB analog output (VESA DDC not
supported)
LVDS output for TFT FPDs
IDE Interface:
One-channel, 44-pin, 2mm connector. Supports
up to and including ATA 100.
Supports two Parallel ATA IDE devices (hard
drive, CD-ROM, CF, etc.)
EPM-15 Reference Manual
-40° C to 85° C
(with 256 MB soldered on
mouse, Running
Compact Flash:
Shares IDE channel, master or slave
Ethernet Interface:
EPM-15g, h -- Intel 82551ER based 10BaseT /
100BaseTX Fast Ethernet Controller
EPM-15S, E -- Intel 82541ER based 10BaseT /
100BaseTX Ethernet Controller
COM1 Interface:
RS-232, 16C550 compatible, 115 kbps max.
COM3–4 Interface:
RS-422/485, 16C550 compatible, 460 kbps max.
LPT Interface:
Bi-directional/EPP/ECP compatible
BIOS:
General Software Embedded BIOS© 2000 with
OEM enhancements
Field-upgradeable with Flash BIOS Update Utility
Bus Speed:
PC/104-Plus (PCI): 33MHz
PC/104 (ISA): 8MHz
Compatibility:
PC/104 – Partial compliance (See PC/104
expansion bus)
Embedded-PCI (PC/104-Plus) – full compliance,
3.3V signaling
Weight:
0.254 lbs (0.115 kg)
Introduction
2