A P P E N D I X
A
Remotely managing your interactive whiteboard system
Source selection controls
These commands switch input sources. The source type determines which commands can be
accepted.
Command
get input
set input=[field]
The following table describes the source selection commands:
Command
get input
set input=[field]
The following table describes the command/response definitions for switches between different
embedded applications on the appliance:
Command
set application [target]
get application
The following table describes field definitions for switches between different embedded applications
on the appliance:
Field
Current application
application=whiteboard
Target application
set application=whiteboard
74
Response
input=[field]
input=[field]
Description
Returns the projector's current input.
Returns the input to one of the selectable fields.
Response
application=[current]
application=[current]
Possible values
whiteboard
l
web
l
pdf
l
viewscreens
l
whiteboard
l
web
l
pdf
l
viewscreens
l
Available in Standby
mode
Yes
No
Powered off
No
Yes
Description
The appliance is currently
running this application.
The appliance is set to the
target application.