Focusing The Image; Adjusting The Image - SMART Board 800ixe-MP Configuration And User's Manual

C H A P T E R 4
Using your interactive whiteboard system

Focusing the image

Use the focus dial located on the bottom of the SMART UX60 projector to focus the projected image.
g
To focus and adjust the image
Turn the focus dial clockwise or counterclockwise until the image is in focus.

Adjusting the image

Project a computer image set to the proper resolution while adjusting the image. If you don't
l
have a computer, use the projector's default background so that you can see the full projected
image clearly. If possible, use a pure white screen to allow for easier alignment.
Use the mechanical adjustments described in the installation document to make image
l
adjustments instead of the projector's on-screen menu options.
When adjusting keystone (tilt), ensure that the top and bottom edges of the image are
l
horizontal before you position the left and right edges of the image relative to your interactive
whiteboard.
To fine-tune the image, you might need to repeat all steps described in the installation
l
document in smaller increments.
26