SMART Board 800ixe-MP Configuration And User's Manual page 29

C H A P T E R 4
Using your interactive whiteboard system
Using the remote control buttons
The projector remote control enables you to access on-screen menus and change projector settings.
Press the Power button on the ACP and select the Standby button or press the Power
twice on the remote control to put the projector into Standby mode. You can also use the Input button
on the remote control or ACP to switch sources on the projector.
Number Function
1 Input
2 Menu
3 (Left), (Right),
(Up) and (Down) arrows
4 Hide
5 Mode
6 Mute
7 (Power)
8 (Enter)
9 (Volume Up)
10 (Volume Down)
19
Description
Select an input source
Show the projector menus
Change the menu selections and adjustments
Freeze, hide or display the image
Press once to freeze the image.
l
For example, you can display a question on
the screen while you check your e-mail.
Press again to hide the image, that is, to
l
display a black screen.
Press again to return to the live image.
l
Select a display mode
Control mute settings from your audio output
device (not included)
Put the projector into Standby mode or turn it on
Accept the selected mode or option
Increase the volume
Decrease the volume
button