Answer A Ptt Call; Change A One-To-One Ptt Call To An Intercom Call - AT&T CL84367 Complete User's Manual

Multiple handset use
Push-to-talk (PTT)

Answer a PTT call

You can respond to a PTT call, as described below.
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your
device shows:
PTT From HS X To HS X (the first X represents the initiating handset
f f
number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
PTT From HS X To Base (X represents the initiating handset number)
f f
or PTT From HS X To Base & HS X (the first X represents the initiating
handset number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
PTT From Base To HS X (the X represents your handset number; a
f f
maximum of five handset numbers appear).
3. When your speakerphone light is off (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or
/PTT
on your telephone base. You will hear a chirp. Speak towards
FLASH
the device.
While you are speaking, your device shows PTT To Base, PTT To
f f
Handset: X (X represents the handset numbers of one or more
destination handsets; a maximum of five handset numbers appear), or
PTT To Base & Handset: X (X represents the handset numbers of one
or more destination handsets; a maximum of four handset numbers
appear).
Your voice is broadcast to all destination devices.
f f
After speaking, release PUSH TO TALK on your handset or
on your telephone base. Your device will beep. After the beep, if your
speakerphone light is off, you can press and hold PUSH TO TALK on your
handset or
FLASH
the destination device can respond.

Change a one-to-one PTT call to an intercom call

You can convert a one-to-one PTT session to an intercom call.
1. When your device shows Press and hold [PTT] to talk, press
The screen shows Intercom.
/SELECT. Your device displays Calling base, Calling BASE 0
2. Press
MENU
or Calling HANDSET X. The destination device briefly shows Push to
talk Ended and then HANDSET is calling, HANDSET X is calling, Base is
calling or BASE 0 is calling. The destination device rings.
/PTT on your telephone base to continue speaking, or
56
/PTT
FLASH
/SELECT.
MENU