Cover Open Sensor - Epson Artison 800 Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.2.5.5 Cover Open Sensor

Parts/Components need to be removed in advance:
Scanner Unit/ADF Unit/Scanner Upper Housing
Removal procedure
Some of the parts of Artisan 800/PX800FW/TX800FW differ from
C H E C K
those of Artisan 700/PX700W/TX700W.
P O I N T
Unless otherwise specified, this section describes the procedures for
Artisan 800/PX800FW/TX800FW. The differences that may affect
the disassembly/reassembly procedures of Artisan 700/PX700W/
TX700W will be provided in "Reassembly", etc.
1. Release the hooks (x2) of the Sensor Cover, and remove the Sensor Cover
from the Scanner Lower Housing.
Artisan 800/PX800FW/
TX800FW
Sensor Cover
Figure 4-174. Removing the Cover Open Sensor (1)
DISASSEMBLY/ASSEMBLY
Artisan 700/PX700W/
TX700W
Sensor Cover
Hook
Disassembly Procedures
http://www.manuals4you.com
2. Disconnect the Cover Open Sensor FFC from the connector of the Cover
Open Sensor, and remove the Cover Open Sensor from the Scanner Lower
Housing.
Cover Open Sensor FFC
Figure 4-175. Removing the Cover Open Sensor (2)
When attaching the Cover Open Sensor, insert it into the space
inside the ribs (x2)
in Fig. 4-174.
Figure 4-176. Attaching the Cover Open Sensor
Revision C
Cover Open Sensor
of the Scanner Lower Housing as shown
Cover Open Sensor
Rib
Confidential
173