Epson Artison 800 Service Manual page 155

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Be careful not to touch the PF Scale with bare hands.
C A U T I O N
Be careful not to damage or contaminate the PF Scale.
12. Remove the E-ring and remove the PG Lever L.
Left side
Figure 4-134. Removing the Carriage Unit (3)
13. Removing the Torsion Spring L. (See
14. Remove the securing ring that secures the PG Cam L and remove the PG Cam
L.
Left side
PG Cam L
Securing ring
Figure 4-135. Removing the Carriage Unit (4)
DISASSEMBLY/ASSEMBLY
PG Lever L
E-ring
Fig. 4-135.)
Torsion Spring L
Rib
Disassembly Procedures
http://www.manuals4you.com
Be careful not to damage the Carriage Shaft with the Frame.
C A U T I O N
15. Move the Carriage Unit to the 80 digit side, and lift the Carriage Unit at the
cutout of the CR Guide Plate, and remove the point A on the rear of the
Carriage Unit from the CR Guide Plate.
Side of the Carriage Unit
Point A
Figure 4-136. Removing the Carriage Unit (5)
16. Move the Carriage Unit to the center.
CR Guide Plate
Figure 4-137. Removing the Carriage Unit (6)
Revision C
Carriage Unit
Cutout of the CR
Guide Plate
Carriage Shaft
Carriage Unit
156
Confidential