Epson Artison 800 Service Manual page 205

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
MAIN BOARD (REAR SIDE OF THE CARTRIDGE BOX)
(ARTISAN 800/PX800FW/TX800FW)
No. FFC/cable name
1 CR Encoder FFC
2 Head FFC (x4)
3 CSIC FFC
Note * : See Fig. 4-245 for the connector positions on the Main Board.
Ferrite core:
Put Head FFC (x4) and CR Encoder FFC through
this, and place it on the rear side of Cartridge Box
and secure it with double-sided tape.
CSIC FFC
Head FFC (x4):
Route them through the ribs (x4)
and ferrite core, and secure them
on the rear side of Cartridge Box
with double-sided tape.
CR Encoder FFC:
Route this through the ribs
(x4) and ferrite core.
Figure 4-251. Rear side of the Cartridge Box(Artisan 800/PX800FW/TX800FW)
DISASSEMBLY/ASSEMBLY
CN No. * Remarks
CN6 Ferrite Core x2
CN1,2,3,4 Ferrite Core x1
CN5 ---
Fold line
Rib
Double-sided tape
Routing FFC/cables
http://www.manuals4you.com
MAIN BOARD (BEHIND CARTRIDGE BOX)
(ARTISAN 700/PX700W/TX700W)
No. FFC/cable name
1 Panel FFC
2 CR Encoder FFC
3 Head FFC (x4)
4 CSIC FFC
Note * : See Fig. 4-247 for the connector positions on the Main Board.
Put Panel FFC only
through ferrite core.
CSIC FFC
CR Encoder FFC & Head FFC (x4):
Route them through the ribs (x4),
and secure them with double-sided
tape (x2) behind the Cartridge Box.
Panel FFC:
Route it through the ribs
(x4), and ferrite core.
Figure 4-252. Routing to the FFC Holder(Artisan 700/PX700W/TX700W)
Revision C
CN No. * Remarks
CN33 Ferrite core (x1)
CN6 ---
CN1,2,3,4 ---
CN5 ---
CR Encoder FFC
Panel FFC
Head FFC (x4)
Spacer:
Attach it to Panel FFC with double-sided
tape, and secure it with the hooks (x3).
Fold line
Rib
Double-sided tape
Confidential
206