Epson Artison 800 Service Manual page 67

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Occurrence
Symptoms
Timing
Photo Tray does not move
Any time
at all.
Occurrence
Symptoms
Timing
The error occurs even the
Any time 12cm CD/DVD is on the
CDR Tray.
TROUBLESHOOTING
Table 3-11. Check point for the Photo Tray Error according to each phenomenon
Failed Part /
Part Name
1. Is the Cassette Unit correctly installed?
Cassette
2. Is the Cassette Unit damaged?
1. Is the Photo Tray Sensor cable properly connected to
CN12 connector on the Main Board?
Photo Tray
2. Is Photo Tray Sensor cable damaged?
Sensor
3. Is Photo Tray Sensor damaged?
Table 3-12. Check point for the CD size Error according to each phenomenon
Failed Part /
Part Name
1. Is the PW Sensor free from ink stain or paper dust?
2. Is the PW Sensor connector cable properly connected to
the connector of the PW Sensor and CR Encoder board?
PW Sensor
3. Is the PW Sensor connector cable damaged?
4. Is the PW Sensor damaged?
1. Is the white marking of the CDR Tray free from ink stain
or paper dust?
CDR Tray
2. Is CDR Tray correctly installed?
Troubleshooting by Error Message
http://www.manuals4you.com
Check Point
1. Install Cassette Unit correctly.
2. Replace the Cassette Unit with a
1. Connect the Photo Tray Sensor
2. Replace the printer mechanism
3. Replace the printer mechanism
Check Point
1. Clean the surface of the PW
2. Connect the PW Sensor
3. Replace the Carriage Unit with a
4. Replace the Carriage Unit with a
1. Clean the marking of the CDR
2. Install the CDR Tray correctly.
Remedy
4.2.2.12 " Cassette Unit "
(p.114)
new one.
4.2.3.2 " Main Board /
cable correctly to CN12 on the Grounding Plate M/B "
Main Board. (p.117)
with a new one
with a new one
Remedy
Sensor.
connector cable correctly.
4.2.4.16 " Carriage Unit "
(p.154)
new one.
new one.
4.2.4.8 " CDR Tray Assy "
Tray.
(p.140)
Revision C
Reference
---
Reference
68
Confidential