Rear Right Fax Housing - Epson Artison 800 Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.2.2.10 Rear Right FAX Housing

The disassembly/reassembly procedures of Artisan 700/PX700W/
C H E C K
TX700W differ from those of Artisan 800/PX800FW/TX800FW.
P O I N T
See 4.3.1.6 "Rear Right Housing (Artisan 700/PX700W/TX700W)"
(p192) for the procedures.
Parts/Components need to be removed in advance:
ADF Unit (Artisan 800/PX800FW/TX800FW only)/Scanner Unit/Upper Left
Housing/Paper Guide Top Assy/Upper Housing/Hinge
Removal procedure
1. Remove the screws (x3) that secure the Rear Right FAX Housing.
Figure 4-26. Removing the Rear Right FAX Housing (1)
DISASSEMBLY/ASSEMBLY
Hook A
Rear Right FAX Housing
C.B.P. 3x10 (6±1Kgfcm)
C.B.S. 3x6 (black) (8±1Kgfcm)
C.B.A. 3x8 (black) (6±1Kgfcm)
Disassembly Procedures
http://www.manuals4you.com
2. Release the ribs (x2) and hook B on the right side, and also release the point
A, then remove the Rear Right FAX Housing by lifting it in the direction of
the arrow. (See Fig. 4-26, Fig. 4-27.)
Hook B
Right Housing
Rear Right FAX Housing
Figure 4-27. Removing the Rear Right FAX Housing (2)
When installing the Rear Right FAX Housing, insert the ribs
(x2) of the Rear Right FAX Housing to the inside of the Right
Housing. (See Fig. 4-27.)
When installing the Rear Right FAX Housing, align the point A
of the Rear Right FAX Housing with the inside of the Base
Frame. (See Fig. 4-27.)
Revision C
Point A
Rib
112
Confidential