Epson Artison 800 Service Manual page 207

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
No. FFC/cable name
1 PF Motor Cable
2 Power Supply Unit cable
Note * : See Fig. 4-245 for the connector positions on the Main Board.
Right
PF Motor cable:
side
Place the relay connector to the hole on
Base Frame, and route the cable through
the hooks (x3) and the groove (x1).
Power Supply Unit cable:
Route this through the groove on Base Frame.
Views without the CDR
PF Motor cable:
Route through the hooks (x5)
and secure with the acetate tape.
Acetate tape
Power Unit cable:
Route this through the hooks (x5)
and secure it with acetate tape.
Figure 4-255. PF Motor Cable, Power Supply Unit Cable
DISASSEMBLY/ASSEMBLY
*
CN No. Remarks
CN22 Ferrite Core x1
CN501 ---
Relay Connector
Do not let this
get caught.
Hook securing PF Motor cable
Hook securing Power Supply Unit cable
Groove
Routing FFC/cables
http://www.manuals4you.com
No. FFC/cable name
1 PE Sensor Cable
See for the connector positions on the Main Board.
Note " * " : Fig. 4-245
To the dowel of Base Frame
PE Sensor cable:
Route this through the grooves (x3)
of Transmission Holder Assy.
PE Sensor cable:
Route this through the dowels, and
attach ferrite core into Base Frame.
To Transmission Holder Assy
Figure 4-256. PE Sensor Cable
Revision C
*
CN No. Remarks
CN9 Ferrite Core x1
Transmission Holder Assy
To PE Sensor
Ferrite core
To Main Board
Groove
Dowel
208
Confidential