Epson Artison 800 Service Manual page 183

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
3. Remove the E-ring.
4. Remove the torsion spring from the ADF PF Roller, and remove the ADF PF
Roller from the ADF Frame Unit in the direction of the arrow.
ADF PF Roller
E-ring
Figure 4-202. Removing the ADF PF Roller (3)
When installing the ADF PF Roller, attach the leg of the torsion
spring on the ADF PF Roller as shown in
After replacing or removing the ADF PF Roller, be sure to perform
A D J U S T M E N T
R E Q U I R E D
the required lubrication. (See
DISASSEMBLY/ASSEMBLY
Torsion spring
Fig. 4-202.
Chapter 6 "MAINTENANCE".)
Disassembly Procedures
http://www.manuals4you.com
Revision C
184
Confidential