Front Frame; Ej Frame Assy / Ej Release Frame Assy R/ Ej Release Frame Assy L - Epson Artison 800 Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W

4.2.4.12 Front Frame

The Main Frame becomes unstable once it is removed from the
C H E C K
Base Frame. Be careful not to deform the frame during
P O I N T
performing the following procedures.
Refer to 4.2.4.11 Main Frame (p144)
need to be removed before removing the Main Frame.
Parts/Components need to be removed in advance:
Main Frame
Removal procedure
1. Remove the screw (x1) that secures the FFC Holder, and remove the FFC
Holder. (See Fig. 4-109.)
2. Remove the screws (x2) that secure the Front Frame, and remove the Front
Frame.
Front side
Front Frame
Figure 4-109. Removing the Front Frame
Align the positioning holes (x2) of the Front Frame with dowels (x2)
of the Main Frame. (See
DISASSEMBLY/ASSEMBLY
for the Parts/Components
FFC Holder
Positioning hole & dowel
C.B.P. 3x8 (6±1Kgfcm)
C.B.S. 3x4 (8±1Kgfcm)
Fig. 4-109)
Disassembly Procedures
http://www.manuals4you.com
4.2.4.13 EJ Frame Assy / EJ Release Frame Assy R/
EJ Release Frame Assy L
The Main Frame becomes unstable once it is removed from the
C H E C K
Base Frame. Be careful not to deform the frame during
P O I N T
performing the following procedures.
Refer to 4.2.4.11 Main Frame (p144)
need to be removed before removing the Main Frame.
Parts/Components need to be removed in advance:
Main Frame/Front Frame
Removal procedure
1. Remove the securing ring from the EJ Frame Shaft and remove the Spur Gear
A. (See Fig. 4-110.)
2. Remove the screw (x1) that secures the EJ Release Frame Assy R, and
remove the EJ Release Frame Assy R.
EJ Frame Shaft
EJ Release Frame Assy R
Figure 4-110. Removing the EJ Release Frame Assy R
Revision C
for the Parts/Components
Spur Gear A
Securing ring
Positioning hole & dowel
C.B.S. 3x6 (8±1Kgfcm)
147
Confidential