Epson Artison 800 Service Manual page 154

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
4. Detach the CR Timing Belt from the CR Motor.
Rear side
CR Motor
Figure 4-130. Removing the CR Timing Belt
Be careful not to lose the Driven Pulley Shaft.
C A U T I O N
5. Remove the screw (x1) that secures the Driven Pulley Timing Assy, and
remove the Driven Pulley Timing Assy. (See
6. Remove the Driven Pulley from the Driven Pulley Timing Assy, and remove
the CR Timing Belt.
CR Timing Belt
Figure 4-131. Removing the Driven Pulley Timing Assy
DISASSEMBLY/ASSEMBLY
CR Timing Belt
Fig. 4-131.)
Driven Pulley
Driven Pulley Timing Assy
C.B.P. 3x8 (6±1Kgfcm)
Disassembly Procedures
http://www.manuals4you.com
7. Remove the Frame Sheet from the Main Frame.
8. Remove the E-ring and remove the PG Lever R. (See
9. Remove the Torsion Spring R.
Torsion Spring R
Right side
Frame Sheet
Figure 4-132. Removing the Carriage Unit (1)
10. Remove the securing ring that secure the PG Cam R and remove the PG Cam
R. (See Fig. 4-135.)
11. Remove the Flat Washer and the Spring Washer.
Right side
Securing ring
PG Cam R
Figure 4-133. Removing the Carriage Unit (2)
Revision C
Fig. 4-132.)
PG Cam R
E-ring
PG Lever R
Double-sided tape
Rib
Edge of Main Frame
Flat Washer
Spring Washer
Confidential
155