Speaker - Toshiba TECRA M3 Maintenance Manual

4 Replacement Procedures

4.21 Speaker

Removing the Speaker
To remove the speaker, follow the steps below and refer to Figure 4-42.
1. Remove the following screws and the speaker holders and speakers (right and left).
?
M2.5? 6B

Speaker

2. Peel off the two acetate tapes and three insulators securing the speaker cable.
3. Remove the speaker cable from the slot.
4-62
FLAT HEAD screw
Speaker cable
Insulator
Insulator
Speaker holder
Figure 4-42 Removing the speakers
? 2
Acetate tape
Speaker holder
Speaker
M2.5? 6B FLAT HEAD
TECRA M3 Maintenance Manual (960-507)
4.21 Speaker
Insulator
M2.5? 6B FLAT HEAD