Toshiba TECRA M3 Maintenance Manual page 206

3.29 LAN/Modem/Bluetooth/IEEE1394 Test Program
When the test begins, the machine displays BD_ADDR of the DUT. The progress
bar appears when the preparation is completed. The following message is
displayed.
----------------------------------------------------------------------------
-
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX
Co.
----------------------------------------------------------------------------
-
+----------------------+
| DUT
+----------------------+
Ready>>>>>>>>>>>>>>>>>>>>>>
Insert a floppy disk containing the test program into the tester machine and turn on
the power. When the Bluetooth test menu is displayed on the tester machine, press
T and Enter to select the subtest. The following message will appear:
----------------------------------------------------------------------------
-
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX
Co.
----------------------------------------------------------------------------
-
+------------------+
|
| Tester
|
+------------------+
Then press Space to start the Bluetooth communication test.
TECRA M3 Maintenance Manual (960-507)
| BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
[ESC] : Stop
|
|
|
[ESC]:Finish Tester
Is DUT ready?
3 Tests and Diagnostics
Copyright (C) by TOSHIBA
<- Progress Bar
Copyright (C) by TOSHIBA
[SPACE]:Start
3-79