4.4 SD card
4.4
SD card
Removing the SD card
To remove the SD card, follow the steps below and refer to Figure 4-3.
CAUTION: Before you remove the SD card, refer to the card's documentation and to
your operating system documentation for proper procedures and
precautions.
1. Push the SD card in (indicated as "1" in the figure below) and release it to pop the card out
slightly.
2. Grasp the SD card and pull it out (indicated as "2" in the figure below).
SD card
2
Installing the SD card
To install the SD card, follow the steps below and refer to Figure 4-3.
1. Insert the SD card.
2. Push it carefully to ensure a firm connection.
TECRA M3 Maintenance Manual (960-507)
1
Figure 4-3 Removing the SD card
4 Replacement Procedures
4-13