4.18 Fan
4.18 Fan
Removing the Fan
To remove the fan, follow the steps below and refer to Figure 4-35.
1. Remove the following screws securing the fan.
?
M2.5? 4B
2. Peel off the glass tape and disconnect the fan cable from the connector CN8770 on the
system board.
3. Remove the fan.
M2.5? 4B FLAT HEAD
Fan
TECRA M3 Maintenance Manual (960-507)
FLAT HEAD screw
Fan cable
Figure4-35 Removing the fan
4 Replacement Procedures
? 2
Glass
tape
M2.5? 4B FLAT HEAD
CN8770
4-57