4 Replacement Procedures
4.23 LCD unit / FL inverter
4.23 LCD unit / FL inverter
Removing the LCD unit / FL inverter
To remove the LCD unit / FL inverter, follow the steps below and refer to Figure 4-46 to
4-51.
1. Remove the two mask seals and the following screws securing the LCD mask.
?
? 2
M2.5? 6B
FLAT HEAD screw
Mask seal
M2.5? 6B FLAT HEAD
Mask seal
M2.5? 6B FLAT HEAD
Figure 4-46 Removing the mask seals and screws
4-66
TECRA M3 Maintenance Manual (960-507)