Cooling Fin / Cpu - Toshiba TECRA M3 Maintenance Manual

Personal computer

Hide thumbs Also See for TECRA M3:

Table of Contents

4.19 Cooling fin / CPU

Removing the Cooling fin / CPU

To remove the Cooling fin / CPU, follow the steps below and refer to Figure 4-36 to 4-38.

CAUTION: 1) The CPU can become very hot during operation. Be sure to let it cool

before starting repair work.

2) When you remove the CPU, wipe the grease off of the bottom of the fin

and top of the CPU. Apply new grease when installing.

1. Remove the following screws securing the CPU holder, in the reverse order of the number

marked on the holder.

CAUTION: Remove the screws in the order of mark "3", "2" and "1" on the CPU

2. Remove the CPU holder.

TECRA M3 Maintenance Manual (960-507)

Figure4-36 Removing the CPU holder

4 Replacement Procedures

Table of Contents