Adjusting The Headlight Beam - Yamaha TW125 1999 Service Manual

REPLACING THE HEADLIGHT BULB/

ADJUSTING THE HEADLIGHT BEAM

3. Remove:
S headlight bulb holder 1
S headlight bulb 2
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
4. Install:
S headlight bulb (New)
Secure the new headlight bulb with the head-
light bulb holder.
CAUTION:
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
5. Install:
S headlight bulb holder
6. Connect:
S headlight coupler
7. Install:
S headlight unit
S headlight cover
EAS00184
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
S headlight beam (vertically)
a. Turn the adjusting screw 1 in direction a or
b .
! Headlight beam is
Direction
a
! Headlight beam is
Direction
b
3-38
CHK
ADJ
raised.
lowered.