SHIFT SHAFT AND STOPPER LEVER
EAS00328
CHECKING THE SHIFT SHAFT
1. Check:
S shift shaft 1
S shift lever 2
Bends/damage/wear ! Replace.
S shift lever spring
Damage/wear ! Replace.
EAS00330
CHECKING THE STOPPER LEVER
1. Check:
S stopper lever
Bends/damage ! Replace.
Roller turns roughly ! Replace the stopper
lever.
INSTALLING THE SEGMENT
1. Install:
S segment 1
S dowel pin 2 (long length)
S dowel pins 3 (short length)
NOTE:
Install the dowel pin 2 (long length) into the
hole beside the match mark a position.
2. Install:
S segment 1
NOTE:
Fit the dowel pin 2 (long length) on the seg-
ment to the locating hole a on the sift cam and
install the segment.
4-40
ENG