Checking The Brake Fluid Level - Yamaha TW125 1999 Service Manual

Table of Contents

Advertisement

CHECKING THE BRAKE FLUID LEVEL

EAS00115
CHECKING THE BRAKE FLUID LEVEL
1. Stand the motorcycle on a level surface.
NOTE:
S Place the motorcycle on a suitable stand.
S Make sure that the motorcycle is upright.
2. Check:
S brake fluid level
Below the minimum level mark a ! Add the
recommended brake fluid to the proper level.
Recommended brake fluid
DOT 4
WARNING
S Use only the designated brake fluid. Other
brake fluids may cause the rubber seals to
deteriorate, causing leakage and poor
brake performance.
S Refill with the same type of brake fluid that
is already in the system. Mixing brake
fluids may result in a harmful chemical
reaction, leading to poor brake perfor-
mance.
S When refilling, be careful that water does
not enter the reservoir. Water will signifi-
cantly lower the boiling point of the brake
fluid and could cause vapor lock.
CAUTION:
Brake fluid may damage painted surfaces
and plastic parts. Therefore, always clean
up any spilt brake fluid immediately.
NOTE:
In order to ensure a correct reading of the brake
fluid level, make sure that the top of the reser-
voir is horizontal.
3-21
CHK
ADJ

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents