Installing The Starter Clutch - Yamaha TW125 1999 Service Manual

STARTER CLUTCH AND GENERATOR
b. When turning the starter clutch gear clock-
wise a , the starter clutch and the starter
clutch gear should engage.
If the starter clutch gear and starter clutch do
not engage, the starter clutch is faulty and
must be replaced.
c. When turning the starter clutch gear counter-
clockwise b , it should turn freely.
If the starter clutch gear does not turn freely,
the starter clutch is faulty and must be re-
placed.
3. Inspect:
S dowel pins 1
S compression springs 2
S spring caps 3
Wear/Damage ! Replace.
4. Inspect:
S starter wheel gear
(contacting surface)
Pitting/Wear/Damage ! Replace.

INSTALLING THE STARTER CLUTCH

1. Install:
S starter clutch assembly 1
2. Unloosen the starter clutch assembly by us-
ing the center punch.
3. Install:
S compression springs 1
S spring caps 2
S dowel pins 3
4-54
ENG
30 Nm (3.0 mSkg)