Installing The Rear Shock Absorber Assembly - Yamaha TW125 1999 Service Manual

REAR SHOCK ABSORBER AND SWINGARM
4. Check:
S drive chain rollers 1
Damage/wear ! Replace the drive chain.
S drive chain side plates 2
Damage/wear ! Replace the drive chain.
Cracks ! Replace the drive chain and make
sure that the battery breather hose is proper-
ly routed away from the drive chain and be-
low the swingarm.
5. Lubricate:
S drive chain
Recommended lubricant
Engine oil or chain lubricant
suitable for non-O-ring chains
6. Check:
S drive sprocket
S rear wheel sprocket
More than 1/4 tooth a wear ! Replace the
drive chain sprockets as a set.
Bent teeth ! Replace the drive chain
sprockets as a set.
b Correct
1 Drive chain roller
2 Drive chain sprocket
EAS00697
INSTALLING THE REAR SHOCK ABSORB-
ER ASSEMBLY
1. Lubricate:
S spacers
S bearings
Recommended lubricant
Molybdenum disulfide grease
2. Install:
S rear shock absorber assembly
NOTE:
When installing the rear shock absorber assem-
bly, lift up the swingarm.
6-57
CHAS
56 Nm (5.6 mSkg)