Master Cylinder - Yamaha TW125 1999 Service Manual

FRONT BRAKE
4. Check:
S brake hose 1
Cracks/damage/wear ! Replace.
EAS00598
ASSEMBLING
FRONT BRAKE MASTER CYLINDER
WARNING
S Before installation, all internal brake com-
ponents should be cleaned and lubricated
with clean or new brake fluid.
S Never use solvents on internal brake com-
ponents.
Recommended brake fluid
DOT 4
1. Install:
S brake master cylinder 1
NOTE:
S Install the brake master cylinder holder with
the "UP" mark 2 facing up.
S First, tighten the upper bolt, then the lower
bolt.
2. Install:
S copper washers 1
S brake hose 2
S union bolt 3
WARNING
Proper brake hose routing is essential to in-
sure safe motorcycle operation. Refer to
"CABLE ROUTING".
CAUTION:
When installing the brake hose onto the
master cylinder,make sure that the brake
pipe a touches the projection b on the

master cylinder.

6-26
CHAS
AND INSTALLING
7 Nm (0.7 mSkg)
New
26 Nm (2.6 mSkg)
THE