Connection Settings - Udp; Figure 4-8. Udp Connection Settings - Lantronix UDS1100 User Manual

Connection Settings - UDP

To configure a channel's UDP settings:
1. On the main menu, click Connection. The Connection Settings window for the
selected channel displays.
2. In the available fields, enter or modify the following information:
Connect Protocol
Protocol
Datagram Mode
Datagram Type
Accept Incoming
Endpoint Configuration
Local Port
Remote Port
Remote Host
UDS1100 User Guide

Figure 4-8. UDP Connection Settings

Select UDP from the drop-down menu.
Configures the remote IP or network broadcast address and
the remote port. Enter 01 for directed or broadcast UDP. The
default setting is 00.
Select Yes to accept incoming UDP datagrams. The default
setting is Yes.
Enter the local port number.
Enter the port number of the remote device.
Enter the IP address of the remote device.
4: Configuration Using Web-Manager
35