Server Configuration; Figure 4-4. Server Settings - Lantronix UDS1100 User Manual

To specify how data will be transmitted:
1. On the main menu, click Network.
2. Enter the following (as necessary):
Auto Negotiate
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.

Server Configuration

The unit's server values display when you select Server from the main menu. The
following sections describe the configurable parameters on the Server Settings page.
To configure the UDS1100's device server settings:
1. On the main menu, click Server.
2. Configure or modify the following fields:
UDS1100 User Guide
With this option, the Ethernet port auto-negotiates the speed
and duplex with the hardware endpoint to which it is
connected. This is the default.
If this option is not selected, complete the fields that become
available:
Speed: The speed of data transmission. The default
setting is 100 Mbps.
Duplex: The direction of data transmission. The
default setting is Full.

Figure 4-4. Server Settings

4: Configuration Using Web-Manager
27