Apply Settings; Apply Factory Defaults - Lantronix UDS1100 User Manual

Use Broadcast
Device Address Table
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.

Apply Settings

1. To save and apply the configuration changes to the device server, click the
Apply Settings button.
Note: Clicking OK on each page does not change the configuration on the device.
OK tells the UDS1100 what changes to use; Apply Settings makes the changes
permanent and reboots the UDS1100.

Apply Factory Defaults

1. Click the Apply Defaults button to set the device server back to the default
settings. For details see
2. Click Yes to set factory settings, or click No to cancel.
UDS1100 User Guide
4: Configuration Using Web-Manager
Select to broadcast the UDP datagram. Datagrams of type 01
can be sent as a broadcast by enabling this option. The
default is not to broadcast.
Datagrams are sent as subnet-directed broadcasts.
Note:
The table is enabled when Datagram Type is set to FD. Enter
values between 1 and 255 to identify units on the local
network of device servers.
Lantronix Tech Support supports Datagram type 01.
Note:
Datagram Type FD is for OEM use.
on page 59.
Default Settings
36