CHAPTER 1 GETTING STARTED
1.5.3 Power ON
Press >O/T<. All segments will appear briefly followed by a software revision number
(when plugged in first time, or after a power interruption), and then * 0.00g.
Allow one hour warm-up time. The balance should be calibrated before use.
1.5.4 Power OFF
To turn the balance OFF, press and hold >O/T< until the display indicates OFF, then release.
1.5.5 Menu Setup
Programmable features of the Pioneer balances are contained in menus which are accessed
through the Display Panel's control switches. See the Instruction Manual for a full description of
the menus and how to access them.
1.5.6 Menu Structure
Figure 1-3. Pioneer Menu Structure
ENTER MENU – When the balance is on, press and hold Unit/Menu until mMENU appears.
Release the button and the Calibrate [.CAL.] menu will display.
MENU NAVIGATION – To select menus, menu items and settings, press Yes or No. Solid
arrows point to content displayed when Yes is pressed, dashed lines when No is pressed.
CHANGE SETTINGS – To select the displayed setting, press Yes. To move to the next setting,
press No.
EXIT MENU – When [.END.] appears, press Yes to exit the menu function, or No to return to
the Cal menu. Note: Press and hold No at any time to exit quickly.
Pioneer™ Balances Service Manual
1-7
Ohaus Corporation www.ohaus.com