Table of Contents
Advertisement
Available languages
Available languages
Defender 2500
2. INSTALLATION
2.1
Packing List
2.2
Setup
2.2.1 Power Supply Connection
The Type-C cable and the AC adapter can supply power to the terminal.
USB Power
1.
Use the Type-A end of the USB cable to connect to the PC.
2.
Use the other side of the USB cable to connect the terminal.
AC Adapter Power
1.
Use the Type-A end of the USB cable to connect to the AC adapter.
2.
Use the other side of the USB cable to connect to the terminal.
3.
Plug the AC Adapter into the electrical outlet.
Dry Battery Power
4 disposable AA size dry batteries (not included) can supply power to the terminal.
1.
Open the battery compartment door at the bottom of
the terminal.
2.
Install the batteries in the battery compartment.
The battery symbol indicates the battery status:
Battery 5%~25% remaining
Battery 25%~50% remaining
2.2.2 PC Connection
USB to PC
USB is the preferred method of connection. If you connect a USB cable to the PC, it allows the USB
communication with the PC.
NOTE: The USB cable to a PC connection can supply power to the terminal as well.
1.
Use the Type-A end of the USB cable to connect to the PC.
2.
Use the other side of the USB cable to connect the terminal through the mounting hole in the bracket.
RS232 to PC
The RS232 is the alternative method of connection.
1.
Connect the RS232 cable to the terminal through the
mounting hole in the bracket.
2.
Connect the other side of the RS232 cable to the PC.
(Typically labeled COM 1, COM A or IOIOI).
3.
To supply power, you can use the USB cable and AC
adapter or the dry batteries.
Item
Description
1
Terminal
2
USB cable
3
AC adapter
4
Column
5
Column adapter
6
Base including pan
7
Warranty Card
8
Instruction Manual
Quantity
1
1
1
1
1
1
1
1
Battery 50%~75% remaining
Battery 75%~100% remaining
RS232
EN-5
Battery
Advertisement
Chapters
Table of Contents
