Balance Operation; Overview Of The Controls; Admissible Ambient Conditions - OHAUS PA64 Service Manual

1.4 SPECIFICATIONS
Temperature range
Atmospheric humidity
Voltage fluctuations
Installation category
Pollution degree
Power supply voltage
Use only in closed rooms.
1.5

BALANCE OPERATION

This section contains information on the basic operation of the balance, and mechanical
descriptions of the Load Cell. Exploded view drawings are included in Chapter 5, which
identifies all replaceable components of the balance.
Allow one hour for each 5° F or 3° C temperature change before using the balance. Following
temperature stabilization, allow an additional hour after turning the balance on, for the balance
to stabilize.

1.5.1 OVERVIEW OF THE CONTROLS

Pioneer™ Balances Service Manual
TABLE 1-6. ADMISSIBLE AMBIENT CONDITIONS
Figure 1-1. Pioneer, Carat and Gold Series displays.
CHAPTER 1 GETTING STARTED
50° F to 86° F / 10° C to 30° C
80% rh @ to 30° C
-15% +10%
II
2
8-14V ac, 50/60 Hz, 6VA or 9.5-20V dc, 6W
1-5 Ohaus Corporation www.ohaus.com