Aud1Lang, Aud2Lang Menus - Motorola DSR-4530 Operator's Manual

3

Aud1Lang, Aud2Lang Menus

Dspl Field
38
These menus (Audio1 and Audio2 Language) have three fields that allow the user
to modify and view the status of the language for the Audio1 and Audio2 outputs.
This menu also allows the user to view the mode of the audio signal as it is received
from the programmer and before any subsequent down mixing that the DSR-4530
may perform.
Press the 56 buttons until the Aud1Lang menu or Aud2Lang menu appears
(shown below).
AUD1LANG
E
AUD2LANG
E
The Display field allows the user to select the options that are displayed in the Left
(channel) and Right (channel) fields. Press the 4 button until the cursor is at the
Dspl (Display) label, and press the ENTER button to move into the field. Use the
56 buttons to select and display the three options: All, Avail, and Status.
• The All option allows the user to scroll throughout the languages that exist in
the database while in the Left and Right fields. You may wish to select
languages that are not functional at this time but will be functional in the future
- when they are present on the channel.
Press the ENTER button to confirm the selection.
• The Avail (Available) option allows the user to scroll through the languages
supported by the system while the cursor is in the Left and Right fields.
Furthermore, selection of this option allows the user to scroll through only the
languages available for the active service.
Note: If the active service has only three languages, as listed for the virtual
channel or program, only three appear. If the user changes the service, the number
of languages may also change.
Press the ENTER button to confirm the selection.
• The Status option allows the user to view the actual audio language. The actual
language can differ from the chosen language when the user's choice for
language is unavailable. The rules that govern which language the DSR-4530
chooses are described in the next section.
Dspl Left Right InputMode
All def def ---
Dspl Left Right InputMode
All def def ---
Default: All