Aud1Lang, Aud2Lang Menus; Dspl Field - Motorola DSR-6050 Operator's Manual

3

Aud1Lang, Aud2Lang Menus

Dspl Field

30
While analog primary and secondary audio outputs are muted, the two Audio
languages selected here determine which two audio elements will be present in the
ASI 2 (MPEG2) transport stream output. Simply stated, this is where secondary
audio is enabled on the ASI 2/MPEG2 output.
These menus (Audio1 and Audio2 Language) have three fields that allow the user to
modify and view the status of the language for the Audio1 and Audio2 outputs. This
menu also allows the user to view the mode of the audio signal as it is received from the
programmer and before any subsequent down mixing that the DSR-6050 may perform.
Press the56buttons until the AUD1LANG menu or AUD2LANG menu appears.
Note: The two digits in the Left, Right fields indicate the occurrence of the
specified language. The range is between 00 and 99. For example, use Eng13 for
the 13th version of English. This feature is used when there are multiple dialects
within a language.
Press the4button until the cursor is at the Dspl (Display) label, and press the
ENTER button to move into the field. The Display field allows the user to select
the options that are displayed in the Left (channel) and Right (channel) fields.
There are three options: All, Avail, and Status. Press the56buttons to specify the
desired option.
• The All option allows the user to use the arrow buttons to enter the three-letter
code. You may wish to select languages that are not functional at this time but
will be functional in the future. Press the ENTER button to confirm the
selection.
• The Avail (Available) option allows the user to scroll through the languages
supported by the system while the cursor is in the Left and Right fields.
Furthermore, selection of this option allows the user to scroll through only the
languages available for the active service. (If the active service has only three
languages, as listed for the virtual channel or program, only three appear. If the
user changes the service, the number of languages may also change.) Press the
ENTER button to confirm the selection.