Inputmode Field - Motorola DSR-4530 Operator's Manual

3

InputMode Field

Read-only
40
• If the AudioMix option (described on page 23) is set to Dual Mono and a
language pair is not available that matches the user's choice for Left and Right
languages, the DSR-4530 selects and outputs the first occurrence of the Left
language choice. The system cannot take a Left from one audio pair and a Right
from another. If there is no match for the Left language choice, the DSR-4530
uses the default language setting.
• There is an interaction between the Language (Lang) menu (page 38) and the
AudioMix field (page 23):
• If the user had previously selected Stereo or Mono in the AudioMix field
and a specific language as the audio output in the Lang menu, but later
changes the AudioMix menu setting to Dual Mono, the Dual Mono setting
will change both channels to have the same language and a caution screen
displays. After changing the AudioMix menu to Dual Mono, reselect the
languages desired (as required) using the "Aud1Lang, Aud2Lang Menus"
(described on page 38).
• If the user previously selected Dual Mono in the AudioMix field with two
different languages as audio outputs in the Language menu, but later selects
Stereo, Stereo Surround, or Mono in the AudioMix field, the output in this
Language menu automatically sets to the first occurrence of a specified
language and a caution screen is displayed. The IRD will use the language
defined for the Left channel first, then for Right channel if there is no
match for the Left.
This read-only field indicates the incoming audio signal of the active service.