Motorola DSR-4530 Operator's Manual page 65

Cue Tone Field
The Cue Tone (Signal) field lets the user turn the cue tone test ON and OFF. Press
the 4 button until the cursor is at the Cue Tone label, and press the ENTER button
to move into the field. Press the 56 buttons to display the options (On or Off).
Relay Field
The Relay field lets the user individually control/test each of the three ad insertion
relays by turning them on and off, as required. Press the 4 button until the cursor
is at the Relay label, and press the ENTER button to move into the field.
Press the 56 buttons to display the options: Off, Relay 1 On, Relay 2 On, and
Relay 3 On. This field returns to the default value (Off) when the ENTER button is
pressed to exit the field.
DSR-4530
Default: Off
Default: Off
Operating the DSR-4530
59